矿产Waxes-Pharma前接收者 //www.novoestroim.com Thu, 062021年5月8:57:42+00 en-US 时钟 一号 https://wordpress.org/?v=5.7.2 改善老年病人医学:病人特征与固口服表设计之间的考量改善摇摇经验//www.novoestroim.com/coating/medicines-older-patients/ Philippe语言 son,03I202115:30:33+00 Acrylic聚合器 卡拉吉南 细胞以太 装饰 拼接系统添加 盖拉廷 Gellan古姆 HPPC-Hypraymetellose 嘴唇 矿产轴 Petro化工 聚乙烯甘醇 Polyvinyl酒精-PVA shella 启动程序 配方 //www.novoestroim.com/?p=192878
Common types of swalling difficulties

Oral drug administration provided as solid oral dosage forms (SODF) remains the major route of drug therapy in primary and secondary care.有明显证据表明,老年病人口中吞吐问题(例如Disphiga)越来越多,特别是考虑到多发性、虚弱和多药化病人时更是如此。Swallewing缺陷存有 [.]

Der Betrag

Common types of swalling difficulties

Oral drug administration provided as solid oral dosage forms (SODF) remains the major route of drug therapy in primary and secondary care.有明显证据表明,老年病人口中吞吐问题(例如Disphiga)越来越多,特别是考虑到多发性、虚弱和多药化病人时更是如此。Swallowing缺陷对SODF管理有负面影响,导致加入率差和不适当的修改(例如压碎和拆分)。多年来提出了不同的策略,以便通过使用传统管理技术或吞食辅助装置增强SODF吞存经验尽管如此,新配方设计必须通过实施以病人为中心的方法加以考虑,以便有效改善老年病人对SODF的管理与适当的SODF规模缩放并发新片 下载全文章:/a/p>或继续阅读斯特盖曼a hrefss/www.mdpi.com/1999-4923/13/131/32目标s药理学2021年、13年、32年/p> 摘自5章:电影编译材料设计增强SODF滚动经验 (以及出版物表7提及的专利见下)

5.1.1Polyvinyl酒精编码 日本研究者开发了可膨胀平板涂层,由>PVA 和carboxyyyl聚合物[161]组成专利应用技术也公之于众[184]另两个专利还分别描述PVA与多环酸/甘油和guar树胶/甘油Cellulose-proproymecellose片 甘基coates 编码材料与gelatin[163]和agnate/sepherose其他一些配方描述gellan口香糖使用[172],并描述它与聚乙烯甘醇/高压硫酸钠的进一步组合[173]或plulan/manitol[171]此外,还报告一种配方,内含Aginiate/crice酸钠[186].

5.1.4galatin编码s sqium algate应用为增厚剂,制造涂层材料,在水摄取时积聚并形成凝胶[162]。

5.1.6wax编码 Beeswax和talc反爬行涂层获取优滑属性已在专利中披露[181].

51.7Shellac-basets 组成水溶性shellac 的材料另一种专利描述由shellac/PVP/Hycriprocolose/PEG/sucralos[187]多词性coates 双层多词性涂层材料加之cboxyecellose/PVP建议 [60]并描述丙酸共聚物配方[170].

5.1.9聚乙烯Oxide编码 多环乙烷涂层建议作为润滑药用材料涂层可用涂层SODF解析法应用,后加紫外线进程[177].

5.1.10Carrageenan编码 胶片改制成易片平滑面的carrageenan和tre由carangeenan/alginate/xanthan口香糖/HPMC/crospovidone组成复杂混合体已被建议为涂层材料,以提高片片吞食能力[180]包括carangeen/agar/gelatin在内的其他组合也报告[183].

a调味涂层解析法,内含通过喷洒或稀释可应用SODF的粘合物和润滑物(如聚沙分解物和多元醇)In addition, a coating gel that was obtained by polymerization and crosslinking of different polysaccharides that contributes to reduced esophageal friction was also suggested [185].

Table 7: Patents addressing new coating materials to enhance swallowability of SODF.

Der Beitrag Better Medicines for Older Patients: Considerations between Patient Characteristics and Solid Oral Dosage Form Designs to Improve Swallowing Experience erschien zuerst auf Pharma Excipients.

纳诺结构式脂载体装有卷状素:物理化学特征描述、体外释放、exivo皮肤渗透、稳定性和抗氧化活动//www.novoestroim.com/lipids/curcuminoids/ Philippe语言 Thu, 03Sep202012:30:21+00 毒贩子 加特弗塞 glycols系统 嘴唇 矿产油 矿产轴 纳米技术 跨模 启动程序 配方 //www.novoestroim.com/?p=166036
Nanostructured lipid carriers with curcuminoids

Four formulations of nanostructured lipid carriers (NLC) loaded with curcuminoids where prepared, testing two types of solid lipids (Compritol® 888 ATO and Precirol® ATO 5) and two kinds of stabilizers (poloxamer 407 and polysorbate 80).111至214纳米和多差指数之间的粒度值 < 0.3号注册,低Z潜在值 [.]

Beitrag

Nanostructured lipid carriers with curcuminoids

Four formulations of nanostructured lipid carriers (NLC) loaded with curcuminoids where prepared, testing two types of solid lipids (Compritol® 888 ATO and Precirol® ATO 5) and two kinds of stabilizers (poloxamer 407 and polysorbate 80).粒度值111至214纳米和多差指数 < 0.3注册,由于稳定器的非离散性,Z潜在值较低结果表明,表面活性体类型对体外释放率和卷积素前活皮肤渗透能力有影响。

纳米结构化双药运算法管理:系统优化、皮肤学预科评价//www.novoestroim.com/topical-excipient/nanostructured-lipidic-carriers/ Philippe语言 5月5日 2020年5月5日 05:59:14+00 巴斯夫 毒贩子 加特弗塞 嘴唇 矿产轴 新闻发布 Petro化工 Poloxamer系统 主题前接收器 启动程序 配方 //www.novoestroim.com/?p=136296
Nanostructured lipidic carriers

In the present study, we selected two potential herbal drugs (Smilax china and Salix alba) and developed nano lipidic carriers (NLC) gel for safe and effective topical therapy against psoriasis.优化NLCs配方使用Box-Behnken设计选择三大输入变量脂肪集中度、表面活性集中度和三次通奸时间 [.]

Der Betrag

Nanostructured lipidic carriers

In the present study, we selected two potential herbal drugs (Smilax china and Salix alba) and developed nano lipidic carriers (NLC) gel for safe and effective topical therapy against psoriasis.优化NLCs配方使用Box-Behnken设计选择三大输入变量油脂集中度 表面集中度 三级通奸时间and evaluated for the average particle size, polydispersity and %encapsulation as the response parameters.

Highlights
• The study involved development of Smilax china and Salix alba NLCs to achieve enhance bioavailability of both the drugs.

• NLCs were optimized by factorial design to obtain minimum possible size in nano range and high encapsulation.

• Optimized NLCs showed enhanced in vivo antipsoriatic activity on BALB/c mice model as compared to the marketed formulation.

• Histopathology study showed safe nature of the NLCs with no change in skin architecture during antipsoriatic activity.

The outcomes of the present study showed that optimized dual drug-loaded NLCs had low average particle size (150.20 ± 3.57 nm) and polydispersity (0.301 ± 0.01) and high entrapment (86.32 ± 2.78% w/w).优化配方TEM图像显示球形织物释放和皮肤迁移研究显示持久释放毒品(57.55++5.38%)和增强皮肤通量(3.88微克/cm2h)。热分析NLCs显示小鼠皮肤流化状态以利药渗透封装研究显示优化NLC凝胶系统与水合溶解法相比均匀分布和深层渗透再者,皮肤学研究表明药用NLC凝胶渗透小鼠皮肤比市场配方改善从皮肤刺激研究中得分显示开发系统不刺激性此外,在开发模拟中,PASI分数确定所有参数比毒控组下降,并比市场配方效果优于市场化配方所得结果推断出NLCs开发为有效安全切送草药的潜在载体ahref='https/www.scient.com/science/abs/lipdic-carriers/'Nano结构化双药运算器 固态脂层涂层和热熔覆盖微块释放API剖面//www.novoestroim.com/oral-excipients/correlation-between-the-solid-state-of-lipid-coating-and-release-profile-of-api-from-hot-melt-coated-microcapsules/ Philippe语言 太阳2019年5月19日08:03:54+00 细胞以太 装饰 受控发布前接收器 毒贩子 电影前 甘油 嘴唇 矿产轴 Oleo化学 口语前接收器 固态 持续释放代理 启动程序 //www.novoestroim.com/?p=60715

hot-melt-coating

Solvent-free hot melt coating (HMC) provides a safer and more economic process compared to the conventional solvent coating techniques.然而,药物释放不稳定和缺乏基本理解是限制HMC工业生产应用的因素glysryl双接词库/correlation-service-code-api-mel-cote-clipses/

hot-melt-coating

Solvent-free hot melt coating (HMC) provides a safer and more economic process compared to the conventional solvent coating techniques.药物释放不稳定和缺乏基本理解是HMC工业生产应用的限制因素。

微结构固态变换通过极分光显微镜学、DSC和火药X射线分片法研究N-acystene微信封与这些前接收器并储存在长期加速条件中3个月。

新封装微胶囊释放药受微结构、固态和HLB脂质涂层支配加速条件存储后释放剖面变换与某些脂质依赖时间结构变换相关。

glycryl二词存储后减慢释放药量的原因是脂晶体转换为xi形并密晶体结构。

Read more on coating

Der Beitrag Correlation between the solid state of lipid coating and release profile of API from hot melt coated microcapsules erschien zuerst auf Pharma Excipients.

Valsart使用固化超饱和自缩药送系统装有Gelucre//www.novoestroim.com/news/improved-dissolution-and-oral-bioavailability-of-valsartan/ Philippe语言 2019年2月20日Wed:06:30:35+00 Acrylic聚合器 嘴唇 矿产油 矿产轴 新闻发布 固态 冲动剂 持续释放代理 启动程序 //www.novoestroim.com/?p=42048
Improved Dissolution and Oral Bioavailability of Valsartan

To improve the dissolution and oral bioavailability of valsartan (VST), we previously formulated a supersaturable self-microemulsifying drug delivery system (SuSMED) composed of Capmul® MCM (oil), Tween® 80 (surfactant), Transcutol® P (cosurfactant), and Poloxamer 407 (precipitation inhibitor) but encountered a stability problem (Transcutol® P-induced weight loss in storage) after solidification.[.]

DerBeitrag

Improved Dissolution and Oral Bioavailability of Valsartan

To improve the dissolution and oral bioavailability of valsartan (VST), we previously formulated a supersaturable self-microemulsifying drug delivery system (SuSMED) composed of Capmul® MCM (oil), Tween® 80 (surfactant), Transcutol® P (cosurfactant), and Poloxamer 407 (precipitation inhibitor) but encountered a stability problem (Transcutol® P-induced weight loss in storage) after solidification.

In the present study, replacing Transcutol® P with Gelucire® 44/14 resulted in a novel SuSMED formulation, wherein the total amount of surfactant/cosurfactant was less than that of the previous formulation.固化S-SUSMED粒子编译方法将含有VST的SUSMED与选择性固态载体L-HPC和FloritePS-10相混合,VST均以不定状态存在ssmed平板板直接压缩附加前接收者后6个月存储量和杂质变化完全稳定(40+2摄氏度和75+5%相对湿度)。

后获取增强分解(pH1.22h):Ssmed粒子六倍对原VSTs-Sused平板对DiovanS-SUSMED板块增加大鼠口服生物利用率(10 mg/kgVST剂量):约177-198%比原始VST和DiovanVST加载S-S-SEMD配方可能很好地供药行业实际开发使用。
下载整篇文章pdf:s/www.mdpi.com/1999-4923/112/58See also more information on lipid excipients.

Der Beitrag Improved Dissolution and Oral Bioavailability of Valsartan Using a Solidified Supersaturable Self-Microemulsifying Drug Delivery System Containing Gelucire® 44/14 erschien zuerst auf Pharma Excipients.

悬浮实口服胶片涂层使用人工粘度层//www.novoestroim.com/organic-chemicals/cellulose-ethers/gliding-performance-of-solid-oral-dosage-form-film-coatings-using-an-artificial-mucous-layer/ Philippe语言 wed20192月13 10:45:24+00 Acrylic聚合器 细胞以太 装饰 肥酒 电影前 矿产轴 聚乙烯甘醇 固态 启动程序 //www.novoestroim.com/?p=40624
photo-of-gliding-artifial-mucos-layer

Oral drug delivery technology is mainly provided in the form of solid oral dosage forms (SODF) that have to be swallowed intact and move throughout the oro-esophageal system to release the drug content in the stomach or intestine.渐渐有证据表明某些疾病的吞化功能越来越普遍 [.]/p>Der Betrag

photo-of-gliding-artifial-mucos-layer

Oral drug delivery technology is mainly provided in the form of solid oral dosage forms (SODF) that have to be swallowed intact and move throughout the oro-esophageal system to release the drug content in the stomach or intestine.越来越多的证据表明,在某些疾病、多发性和成熟度中,破损吞咽功能日益普遍,预测SODF奥氏滑翔法将非常有用。

第一阶段系统测量动聚合物表面所需的强度,即与脉冲层相接触,第二阶段则阻抗行为超出定义长度所得结果显示,综合滑动剖面视聚合膜测试而定。

carnauba蜡PEG反之,HPPC、PVP和Gelatin涂层需要更高滑动力并显示更大的阻抗力,因为与人工粘结层发生粘合性交互作用所获剖面与前体外数据相关联Read on gliding performance of artificial mucous layers

Der Beitrag Gliding performance of solid oral dosage form film coatings using an artificial mucous layer erschien zuerst auf Pharma Excipients.

当前前创科学动态-产品开发中每个前创量化选择//www.novoestroim.com/binder/current-developments-in-excipient-science/ Philippe语言 Thu, 24I2019 13:43:16+00 Acrylic聚合器 实糖 人工缝补器 宾德 钙碳酸 钙磷酸盐 硫化钙 碳水化合物 细胞脉冲 细胞埃斯特斯 细胞以太 CMC和CroscameloseSudium 装饰 拼接系统添加 颜色/颜色 受控发布前接收器 转换星空 DC前接收器 分解/超分解 干 Starch 毒贩子 仿真程序 Exbistation吸入 肥酒 填充器 电影前 风情/浮点 滑动图 甘油 glycols系统 哈尔特斯 无机化工 嘴唇 液态 润滑油 金属Oxide 微晶体细胞 矿产碳氢 矿产油 矿树 矿产轴 修改Stark 纳米技术 Oleo化学 口语前接收器 Orblite技术前接收器 有机化工 其它前接收者 Oleo化工新手 石油化工前接收者 父继承者 Petro化工 Petrotitum 整容器 聚乙烯甘醇 波维多斯 防腐性 丙烯甘醇 蛋白质 半片段 固态 溶解器 特征前接收器 稳定器 星空 糖酒类 糖类 冲动剂 悬浮代理 持续释放代理 Sweeteners公司 品味掩码 主题前接收器 常识代理 启动程序 //www.novoestroim.com/?p=36079
Overview graphic stakeholders for pharmaceutical excipients

Implication of Quantitative Selection of Each Excipient in Product Development Excipients' role in designing different dosage forms does not require any introduction.以上这些添加物与药理活性物质并发增加这些特性的主要目的是增加大数配方并传递所期望的[.]

Beitrag

Overview graphic stakeholders for pharmaceutical excipients

Implication of Quantitative Selection of Each Excipient in Product Development

Excipients' role in designing different dosage forms does not require any introduction.以上这些添加物与药理活性物质并发增加这些特性的主要目的是增加大片配方并传递期望属性始发者像药物一样,需要验证和标准化下一章简单介绍不同用量表使用前接收者,包括固态用量表、液态用量表和半固态用量表计药先进配方领域的持续开发,我们还覆盖纳米化前接收者。

aContinue  the book chapter on excipients or check 118金宝搏高手论坛

Der Beitrag Current Developments in Excipient Science – Implication of Quantitative Selection of Each Excipient in Product Development erschien zuerst auf Pharma Excipients.

利皮和聚合物制药技术:终身伴//www.novoestroim.com/petrochemicals/mineral-waxes/lipids-and-polymers-in-pharmaceutical-technology-lifelong-companions/ Philippe语言 弗里2019年1月11日-3:51+00 Acrylic聚合器 受控发布前接收器 分解/超分解 嘴唇 矿产轴 Oleo化学 固态 溶解器 启动程序 加特弗斯 //www.novoestroim.com/?p=33412

In pharmaceutical technology, lipids and polymers are considered pillar excipients for the fabrication of most dosage forms, irrespective of the administration route.从辅助飞行器到释放率修饰器、稳定器、溶增器、渗透增强器和转口代理物等各种作用聚焦于选定应用问题 [.]

In pharmaceutical technology, lipids and polymers are considered pillar excipients for the fabrication of most dosage forms, irrespective of the administration route.从辅助飞行器到释放率修饰器、稳定器、溶增器、渗透增强器和转口代理物等各种作用Gattefosse基金会2018年度科学会议讨论了以选择应用为重点,本手稿概述这两类重要前接受者的基本作用,即单独或合并使用,并深入了解它们在各类药配方中的功能特性。重点是口服配方管理水溶性低或渗透性差的活性药素Additionally, this review article covers the use of lipids and polymers in the design of colloidal injectable delivery systems, and as substrates in additive manufacturing technologies for the production of tailor-made dosage forms. More on lipids and polymers or Download full article here: Lipids and polymers in pharmaceutical technology- Lifelong companions

Der Beitrag Lipids and polymers in pharmaceutical technology: lifelong companions erschien zuerst auf Pharma Excipients.

药前配方研究 和儿科口服配方二氯乙酸//www.novoestroim.com/petrochemicals/mineral-waxes/pharmaceutical-preformulation-studies-and-paediatric-oral-formulations-of-sodium-dichloroacetate/ Philippe语言 2018年11月20日 宾德 毒贩子 肥酒 填充器 矿产轴 整容器 溶解器 Sweeteners公司 启动程序 //www.novoestroim.com/?p=22917

The purpose of this study was to develop liquid and solid paediatric formulations of sodium dichloroacetate (DCA) for the treatment of congenital lactic acidosis (CLA).在这次实验中,对活性分子进行了预编程研究以确定药物物理化学特性-二氯乙酸/'药性预编程研究'#/p>Beitrag

The purpose of this study was to develop liquid and solid paediatric formulations of sodium dichloroacetate (DCA) for the treatment of congenital lactic acidosis (CLA).在这次工作上,对活性分子进行了预编程研究,以查明药物与剂量表设计及其制造过程相关联的物理化学属性。TGA和DSC分析显示DA钠非常染色HPLC和NMR分析显示,在所研究的所有pH值中,25和40摄氏度水解大都稳定基于这些结果,DA钠配制成可口化解法,含糖化物、粘度增强器和受CLA影响的儿科病人所容忍的香味前端开发液配方三个月后化学稳定在25摄氏4摄氏度使用稳定性测试显示一个月内没有化学降解和微生物污染DA钠口服片由仿制技术制成,作为一种替代和实用配方,比液型更容易为护理者管理技术解析(欧洲药典报告)显示口服片片快速分解水分3分钟25摄氏度,因此归为口服分解片片预写性研究提供一套参数,可据此进行详细的配方设计。Formulation studies showed that the developed dosage forms achieved adequate stability, producibility and patient acceptability.

More on the pediatric formulation

Der Beitrag Pharmaceutical preformulation studies and paediatric oral formulations of sodium dichloroacetate erschien zuerst auf Pharma Excipients.

物理特征描述和动能建模矩阵片板使用聚合物和蜡制作tromthamol//www.novoestroim.com/news/physical-characterization-and-kinetic-modelling-of-matrix-tablets-of-ketorolac-tromethamol-formulated-with-polymers-and-waxes/ Philippe语言 Tue2016年12月27日14:05:07+00 细胞以太 矿产轴 新闻发布 p>272016年12月抽象目的:设计受控释放ketoractromtemol方法:Waxes(Compritolia ATO 888,ATO5和Stearca-SA)和聚合物(HPC-HPC和XANDER牙套-XG) span类=j-textj-blog后日期December 2016

Abstract

Purpose: To design controlled release ketorolac tromethamol (KT) matrix tablets for increased drug bioavailability.

Methods: Waxes (Compritol® ATO 888, Precirol® ATO 5 and stearic acid – SA) and polymers (hydroxypropyl methylcellulose – HPMC and xanthan gum – XG) were used in the preparation of the matrix tablets at various excipient concentrations for controlled drug delivery.物理属性确定从片片获取药物释放剖面图,药释放机制特征为动能建模解析介质中KT分析量化法也通过某些性能标准验证 。

text-align:说明性;>emstrenge>Results: KT矩阵片板HPCC和XG制作的平板显示比用总蜡制作的平板慢放药剖面图(p < 0.05)。kt释放量随pH增加而增加,因为它是一种微酸(p < 0.05)与HPCC和XG一起制备的所有平板水中都观察到微小差(p > 0.05)。含有40%XG的药片释放速度快于HPCC(30-40%)和XG(30-40%)pH7.2编译的药片(p < 0.05)药片编译用蜡聚合物的释放机制非Fickian式,表示并发/腐扩散/聚合物松散。

Download

Gülgün Yener, Evin Ayçiçek, Melike Üner* and Ebru Altuntaş
Department of Pharmaceutical Technology, Faculty of Pharmacy, Istanbul University, Beyazit, Istanbul 34116, Turkey
http://dx.doi.org/10.4314/tjpr.v15i12.3
2016_15_12_3.pdf
Adobe Acrobat Document 394.4 KB

Der Beitrag Physical characterization and kinetic modelling of matrix tablets of ketorolac tromethamol formulated with polymers and waxes erschien zuerst auf Pharma Excipients.